Automatic, low maintenance, hot melt edge pre-gluer, for pre-gluing materials such as: plastic or wood laminate strips, layered strips, 0.4 to 3 mm PVC, ABS, polyester, melamine or wood veneer tapes. Like the PR25P, it automatically glues tapes for later use with edgebanders for pre-glued tapes, as manufactured by Virutex, or with any hot air edgebanding machines. It has thermoelectric temperature control, automatic start and stop of the feed motor, depending on the glue temperature, and an accurate dosage mechanism which dispenses the exact amount of glue to obtain the required density on the back of the tape. It has a built-in, automatic winder which easily unwinds rewinds it already glued with no risk of accidental gluing, thanks to the built in drying unit. It has a low maintenance, non-stick silicon dispenser roller which prevents glue blockages.
The PR25P-DV has a built-in, automatic winder which easily unwinds and rewinds it already glued with no risk of accidental gluing, thanks to the built in drying unit.
Specifications
Input power: 1.720 + 120 W
Min. tape thickness: 0.4 mm
Max. tape thickness (strip): 16 mm
Max. tape thickness (roller): 2 mm
Max. tape thickness (roll+support 2545632): 3 mm
Max. tape width: 104 mm
Feeding speed: 8.5 m/min
Tape pre-glued with 1 kg of glue 250 m of tape 25 mm width
Tank capacity: 2 Kg
Weight: 37.8 Kg
